Configuring Network Settings; Configuring Tcp/Ip Settings - Smartwatch IP Network Cameras User Manual

SmartWatch® IP Network Camera User Manual
 Click
tab to enable the DST function and Set the date of the DST period.
2. Click

5.3 Configuring Network Settings

5.3.1 Configuring TCP/IP Settings

TCP/IP settings must be properly configured before you operate the camera over
network. The camera supports both the IPv4 and IPv6. Both versions may be
configured simultaneously without conflict at least one IP version should be
configured.
Steps:
1. Enter TCP/IP Settings interface:
Configuration > Basic Configuration > Network > TCP/IP
Or Configuration > Advanced Configuration > Network > TCP/IP
Figure 5-4 Time Sync Manually
Figure 5-5 DST Settings
to save the settings.
25 25