Configuring Qos Settings; Configuring Ftp Settings - Smartwatch IP Network Cameras User Manual

SmartWatch® IP Network Camera User Manual
A reboot is required for the settings to take effect.

5.3.7 Configuring QoS Settings

QoS (Quality of Service) can help solve the network delay and network congestion by
configuring the priority of data sending.
Steps:
1. Enter the QoS Settings interface:
Configuration >Advanced Configuration > Network > QoS
2. Configure the QoS settings, including video / audio DSCP, event / alarm DSCP and
Management DSCP.
The valid value range of the DSCP is 0-63. The bigger the DSCP value is the higher
the priority is.
SCP refers to the Differentiated Service Code Point; and the DSCP value is used in the IP
header to indicate the priority of the data.
3. Click
A reboot is required for the settings to take effect.

5.3.8 Configuring FTP Settings

You can configure the FTP server related information to enable the uploading of the
captured images to the FTP server. The captured images can be triggered by events
or a timing snapshot task.
Figure 5-15 QoS Settings
to save the settings.
33 33