Configuring External Alarm Input - Smartwatch IP Network Cameras User Manual

SmartWatch® IP Network Camera User Manual
2. Check Enable Tamper-proof checkbox to enable tamper-proof detection.
3. Set the tamper-proof area; refer to Step 1 Set the Motion Detection Area in
Section 5.6.1.
4. Click
arming schedule configuration is the same as setting the arming schedule for motion
detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in Section
5.6.1.
5. Check the checkbox to select the linkage method for tamper-proof. Audible
warning, notify surveillance center, send email and trigger alarm output are
selectable. Please refer to Step 3 Set the Alarm Actions for Motion Detection in
Section 5.6.1.
6. Click

5.6.3 Configuring External Alarm Input

1. Enter the Alarm Input Settings interface:
Configuration > Advanced Configuration> Events > Alarm Input:
2. Select the alarm input No. and the Alarm Type. The alarm type can be NO
Figure 5-31 Tamper-proof Alarm
to edit the arming schedule for tamper-proof detection. The
to save the settings.
47 47