Setting / Calling A Preset - Smartwatch IP Network Cameras User Manual

SmartWatch® IP Network Camera User Manual

There are 8 direction arrows ( ,

For the cameras that support lens control only, the direction buttons will be invalid.

4.4.2 Setting / Calling a Preset

 Setting a Preset:
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to save the setting of the current preset.
4. Click to delete the preset.
, ,
Table 4-2 Descriptions of PTZ Control Panel
Button
Figure 4-4 Setting a Preset
, , , , ) in the live view window.
Description
Zoom in/out
Focus near/far
Iris open/close
Light on/off
Wiper on/off
One-touch focus
Initialize lens
Adjust speed of pan/tilt
movements
20 20