Configuring 802.1X Settings - Smartwatch IP Network Cameras User Manual

SmartWatch® IP Network Camera User Manual
4. Click
A reboot is required for the settings to take effect.

5.3.6 Configuring 802.1X Settings

The IEEE 802.1X standard is supported by the IP network cameras, and when the
feature is enabled, the camera data is secured and user authentication is needed
when connecting the camera to the network protected by the IEEE 802.1X.
Before you start:
The authentication server must be configured. Please apply and register a user name
and password for 802.1X in the server.
Steps:
Enter the 802.1X Settings interface:
1.
Configuration > Advanced Configuration > Network > 802.1X
2. Check the Enable IEEE 802.1X checkbox to enable the feature.
3. Configure the 802.1X settings, including EAPOL version, user name and
password.
The EAPOL version must be identical with that of the router or the switch.
4. Enter the user name and password to access the server.
5. Click
to save and finish the settings.
Figure 5-14 802.1X Settings
to finish the settings.
32 32