Gm Set-Up Menu List; Using The Gm Set-Up Menu; Bell Sound Setting When Checking For Stations Within Sphere Of Communications - Yaesu FTM-400DR Operating Manual

GM Set-up Menu List

Menu / Item
1 RANGE RINGER
2 RADIO ID

Using the GM Set-up Menu

Bell sound setting when checking for stations within sphere of communications

During GM operation, a bell notification can be given when a registered group member
or another station whose GM function is in operation enters or exits the sphere of
communication.
1
Press for one second or longer
The set-up menu will be displayed.
2
Touch [GM]
The menu list will be displayed.
3
Touch [1 RANGE RINGER] to select ON/OFF
Each time this is touched, the setting will switch
between "ON" and "OFF".
ON: A bell will sound when a station operating in
the GM mode enters or exits the sphere of
communication.
OFF: A bell will not sound even when a station
operating in the GM mode enters or exits the
sphere of communication.
Tip Factory default value: ON
4
Press for one second or longer
The bell sound ON/OFF setting will be set, and the display will return to the previous
screen.
Explanation of function
Bell sound setting when checking
for stations within sphere of
communications
Specific ID display by transceiver
(Default values shown in BOLD)
33
Available settings
ON / OFF
- (non-editable)