Post Inserter Operations; Keys On Control Panel - Olivetti d-Color MF 452 Reference Manual

3.6 Post Inserter PI-505
3.6.2

Post Inserter Operations

Keys on control panel

When the Post Inserter PI-505 is installed on the Finisher FS-535, you can manually operate the Finisher
FS-535 using the Post Inserter Control Panel.
No. Name
1 Corner Staple Lamp
2 Center Staple & Fold Lamp
3
Finishing
4
2-Hole Lamp
5 3-Hole Lamp
6 Select punch
7
Start/stop
8 4-Hole Lamp
9 Tri-Fold Lamp
10
2 position staple lamp
d-Color MF552/452/362/282/222
Description
Indicates that the corner staple is selected.
Indicates that Center Staple is selected.
Press this key to select finishing.
Indicates that 2-Hole is selected.
Indicates that 3-Hole is selected.
Press this key to select the punch hole type.
Press this key to start post inserter operations.
If you press this key during operation, this unit will
stop.
Indicates that 4-Hole is selected.
Indicates that Tri-Fold is selected.
Indicates that 2-position staple is selected.
3
3-23