Table of Contents
Advertisement
Using S! GPS Navi
About S! GPS Navi
S! GPS Navi uses location information by GPS satellite and by communication
with base stations. View on the map where you are, and send your location
information to compatible SoftBank handsets. Also retrieve information about
your current location, and check the route to your destination. The navigation
application is preinstalled in your handset. For details, contact SoftBank
General Information (page 22-38).
Note
7
When signal reception of the GPS satellite is poor, your position can be
determined by the base station information. However, depending on the
base station's location or signal strength, the margin of error could vary
from hundreds of meters to several kilometers in radius.
7
When you cannot confirm the right location, move to a place where you
can see the sky.
Note that SoftBank accepts no liability whatsoever for any damages
7
arising from use of the location information provided.
7
You cannot confirm the location during the time of Positioning Lock
(page 19-5).
19
19-2
Starting a Navigation Application
Use a navigation application to retrieve information about your current
location or check the route to your destination.
Main
E
E
Tools
menu
1
Select Navi Appli →@
Tip
7
End all paused S! Appli before activating a navigation application.
Checking Your Current Position
Display the current location by starting the Navi Application.
Main
E
E
Tools
menu
1
Select Locate Me →@
A confirmation window is displayed as to whether to send out the
●
location information. If you select Ask Once Only, there is no
confi rmation window showing up next time.
Note
7
When the sending location setting (page 19-6) is set to Do not Send,
the current position cannot be checked. Set to Always Ask or Send.
Tip
Positioning accuracy is indicated in three levels. Level 3 is the most
7
accurate. If accuracy is level 1, it is recommended that you move to a
new location and try again.
S! GPS Navi
S! GPS Navi
Advertisement
Chapters
Table of Contents
