cleans by spraying
amixture ofhot w ater and detergent
through the spray arms
against soiled surfaces.
First, the dishwasher
fills with water covering
the filter a rea. W ater is
through the spray arms. Soil particles
goacross the filter a nd down t he drain a s the
out.This s eries ofsteps are repeated
asneeded. The number ofwater fills vary
with the cycle b eing used.
inside the unit)
Cup S helves
Middle Spray Arm
Features may vary according to model
Wash Cycle Selections
Cycle times are approximate and will vary with
options selected. Hot water is necessary to
activate dishwasher detergent and melt fatty
food soils. An automatic sensor will check the
incoming water temperature and, if it is not
hot enough, the cycle will be lengthened for
automatic water heating in the main wash and
final rinse of all cycles. This happens even
when HI-TEMP WASH option has not been
selected. When Ht-TEMP WASH is selected,
an even higher temperature will be reached to
handle heavier soil loads.
Lights on the console will turn off once
the door is shut and wash cycle begins. If
preferred to have lights remain on see
Console Lights section for instructions.
Option Selections (available on
Hi=Temp Wash Option
When Ht-TEMP WASH option is selected, the
dishwasher heats water in the main wash to
This increase in water temperature helps the
dishwasher detergent remove food grease
and soil from dishes more effectively and aids
HI-TEMP WASH option is available
on POWER PLUS, NORMAL WASH and TOP
RACK cycles. Ht-TEHP WASH is automatically
provided when the POWER PLUS cycle is
When HI-TEMP WASH option is selected, the
indicator light will come on and remain on until
end of cycle. To turn off the HI-TEMP WASH
option, press HI-TEMP WASH a second time.
The indicator light will turn off.