FrontRow Juno Connect Configuration Manual page 7

Step 2:
Your Juno Connect needs information about the other devices it needs to communicate with, and how.
If your configuration — the collection of commands you want to issue from Juno Connect and the
devices you want to control — is the same in each room in your installation, then you will need only one
configuration base file which you will modify with specific IP addresses unique to each room. If the situation
is different from room to room, you will need different base files that are tailored to each configuration.
There are several ways to create your configuration files:
• Go to gofrontrow.com/base-files and find the Base Configuration File library under the Juno Connect
listing. Each Base Configuration File stored here includes the control logic programming needed for
the most common applications.
• If your configuration is uncommon enough that it's outside the scope of the Base Configuration File
library, and you have some basic familiarity with programming, you can easily build your own user
interface designs or control logic programming. See Appendices A, B, and C for a detailed descrip-
tion of how to do this. When configuring your Juno Connect, we recommend using Chrome, Firefox or
Safari browsers.
Getting Your Configuration Files
4