Table of Contents
Advertisement
2.1
Before Operating the Telephones
Used to enter and exit the
Programming mode.
Programmable Function: Located on
the upper part of the CO button or on
the DSS Console . Assigns the desired
(PF)
button and used to access the stored
function. Mostly used as a One-Touch
dialling button. (Only the "F and
number" may be shown on some
telephones.)
Used to redial.
Used to disconnect the line.
Used to store a dialled phone number
and redial.
(SAVE)
SDN: A copy of the other extension's
PDN button. Acts as a proxy of the
(SDN)
owner PDN button.
Used to alternate between the
subfunctions on the display.
SHIFT
Using a Jog Dial
The Jog Dial can be used for the display contrast and the volume control or you can search for desired
items on the display. Rotate the Jog Dial in the either direction as desired. The contrast or the volume
level and the items will change as follows:
Left
(counter-clockwise)
Level decreases
To the previous item
20
Soft: Used to perform a function or
operation appearing on the bottom line
of the display.
Speakerphone: Used for the hands-
free operation.
Used to transfer a call to another party.
Used to monitor an intercom call
automatically, but it cannot be used for
hands-free conversations. It also
mutes the handset microphone during
a conversation.
Used to adjust the speaker / handset
receiver / headset / ringer volume and
VOLUME
the display contrast.
If the term is in parentheses like (Account) in this
section, it means a flexible button has been made
into an "Account" button.
Right
(clockwise)
Level increases
To the next item
Operation
Advertisement
Table of Contents
