Selecting The Display Language; Changing The Handset Phone Number Display; Editing The Names Of The Flexible Keys; Adjusting The Ringer Volume - Panasonic KX-UDT111 Operating Instructions Manual

Before Operating the Telephone

Selecting the Display Language

You can select the language displayed on your handset.
1.
Press or the [CENTER] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Display Option", and
then press .
4.
Press [ ] or [ ] to select "Language", and then
press .
5.
Press [ ] or [ ] to select a language
press .
*1 You can select one of the following 3 languages: English,
Español, FRANÇAIS.
Changing the Handset Phone
Number Display
You can change the display of the handset's phone
number when the handset is in standby mode.
1.
Press or the [CENTER] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Display Option", and
then press .
4.
Press [ ] or [ ] to select "Standby Display",
and then press
5.
Press [ ] or [ ] to select the desired item, and then
press .
Note
•
By default, "H/S No." is selected.
•
For details about standby display settings, see
"Display Option (Page 43)".
Editing the Names of the
Flexible Keys
Web user interface programming is required to change
the names of the Flexible Keys used for the handset.
For details, consult your administrator or dealer.

Adjusting the Ringer Volume

The volume of the ringer can be adjusted, or turned off.
24 Operating Instructions
.
, and then
*1
.
.
Adjusting the Ringer Volume or
Turning the Ringer Off
1.
Press or the [CENTER] navigation key.
2.
Select " Ringer Volume" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select the desired setting (Step
Up, Step Down, Level 1–6, Off), and then press
.
Note
•
You can press the [ ] key instead of performing
steps 1 and 2.
•
For details about setting the ringer pattern, see
"Incoming Option (Page 40)".
Adjusting the Ringer Volume or
Turning the Ringer Off while Ringing
While receiving a call, do the following to adjust the
ringer volume or turn the ringer off:
To adjust the ringer volume
Press [ ] or [ ] to adjust the volume
To turn the ringer off
Press or .
The adjusted volume level will also be used for subsequent calls.
*1
Note
•
If you attach a headset while receiving an
incoming call, the ring from the handset does
not switch to the headset. If you attach a
headset before receiving an incoming call, and
headset ringer is set to "On", ringing will be
heard from the headset.

Changing the Vibrate Setting

1.
Press or the [CENTER] navigation key.
2.
Select " Setting Handset" by pressing the
arrow keys, and then press
3.
Press [ ] or [ ] to select "Incoming Option",
and then press
4.
Press [ ] or [ ] to select "Vibrate", and then
press .
.
.
*1
.
.
Document Version 2013-03