Make An Internal Call To; Another Handset - BT Freelance XD 110 User Manual

Using the additional handset
The BT Freelance XD 110 is NOT GAP compatible,
therefore, it cannot be registered to any other DECT
telephones. However, if you have purchased the
BT Freelance XD 110 Twin you will have the
BT Freelance XD 110 additional handset. Please note
that this is the only handset that can be used with the
main BT Freelance XD 110 base. With the BT Freelance
XD 110 Twin you can make internal calls and transfer
external calls between the two BT Freelance XD 110
handsets.
The BT Freelance XD 110 additional handset comes
pre-registered to the main BT Freelance XD 110 base.
Please ensure you have charged the handset
continuously for at least 16 hours before you use it,
see page xx if you have not done so yet.
Make an internal call to another handset
1. Press .
Int
The other BT Freelance XD 110 handset will ring and
INT will be shown on the display.
To answer the call the other user should press
2. Press to end the call.
BT Freelance XD 110 – Edition 02 – 07.04.04 – 5968
.
21