Cisco Catalyst 2970 Hardware Installation Manual page 60

Installing the Switch
Figure 2-19 Mounting the Switch on a Wall
1
1
User-supplied screws
Catalyst 2970 Switch Hardware Installation Guide
2-22
After the switch is mounted on the wall, you need to do these tasks to complete
the installation:
Power on the switch. See the
•
page 2-8.
Connect to a 10/100 or 10/100/1000 port and run Express Setup. See the
•
Catalyst 2970 Switch Getting Started Guide for instructions
Connect to the front-panel ports. See the
•
Ports" section on page 2-27
page 2-30 to complete the installation.
"Verifying Switch Operation" section on
"Connecting to the 10/100/1000
and the "Connecting to SFP Modules" section on
Chapter 2 Switch Installation
1
OL-6422-01