Neutral (Fig. 9)
The Model DH 30PC2 has a neutral mode used for positioning a tool such as a cold chisel. Adjust the change
lever to "Neutral" (
transmitted. Then turn the grip of the tool retainer to adjust the tool to the desired position.
8-5. Caution when Using "Rotation Only"(No Hammering) Function
The chuck adapter and the drill chuck (optional accessories) are required for drilling into wood or metal materials.
The change lever of the Model DH 30PC2 permits changeover among "Rotation only," "Rotation and hammering"
and "Hammering only" functions. Be sure to adjust the change lever to "Rotation only" for drilling into wood or
metal materials by means of the chuck adapter and the drill chuck (optional accessories). If the change lever is
adjusted to "Rotation and hammering" or "Hammering only" for such operation, the drill chuck will be damaged by
hammering. Please caution the customers about the above.
mark). Engagement between the bevel gear and the clutch is released and no rotation is
Cylinder
Lock sleeve
Slide sleeve (A)
Change lever
Air hole
Clutch
Bevel gear
Fig. 9
--- 18 ---