Hitachi DH 30PC2 Technical Data And Service Manual page 10

E. Crushing operations (hammering only)
Bull point (round type)
(SDS-plus shank)
Code No. 303046
F. Groove digging and edging (hammering only)
Cold chisel
(SDS-plus shank)
Code No. 316657
G. Grooving (hammering only)
Grooving chisel
(SDS-plus shank)
Code No. 316659
H. Drilling hole and driving screw (rotation only)
Drill chuck, chuck adapter (G), special screw and chuck wrench
Special screw
a. Chuck adapter (G) for SDS-plus shank system
b. 13 mm (1/2") Drill chuck 13VLRB-D (with chuck wrench)
c. Special screw (M6 left-hand threaded)
Cutter
(SDS-plus shank)
+
13 mm (1/2") Drill chuck
(13VLRB-D)
(NOTE)
If the tool is to be used for loosening screws, open the three
jaws of the drill chuck and securely fix the drill chuck to chuck
adapter (G) with the special screw (a left-hand threaded M6
Chuck wrench
screw) when mounting the drill chuck onto chuck adapter (G).
Part name
Square bull point
(SDS-plus shank)
Code No. 316656
Code No. 316658
+
Chuck adapter (G)
(SDS-plus shank)
--- 7 ---
Code No.
303623
321814
995344