Hitachi DH 30PC2 Technical Data And Service Manual page 11

(1) Cross-recessed head (Phillips) bit
[Overall length: 70 mm]
(For use with cross-recessed head (Phillips) screw)
Stamped bit No.
Bit No. Code No.
Applicable screw dia. (mm)
955654
No. 2
No. 3 955655
I. Drilling hole (rotation only)
Drill chuck (13VLD-D)
Chuck wrench
(NOTE)
The 13VLD-D drill chuck and chuck adapter (D) cannot be used for reverse rotation. If reverse rotation is
to be used for loosening screws, use the plus bit (Bit No. 2) described below by attaching it directly to
chuck adapter (D).
Chuck adapter (D) (for SDS-plus shank type)
13 mm (1/2") Drill chuck 13VLD-D (with chuck wrench)
J. Drilling screws (rotation only)
Plus driver bit [overall length: 25 mm] (for cross-recessed head screws)
Bit No.
4 --- 5
6 --- 8
For drilling holes in steel and wood
• • •
+
Chuck adapter (D)
(SDS-plus shank)
Part name
+
Chuck adapter (D)
(SDS-plus shank)
(2) Slotted-head (minus) bit
[Overall length: 50 mm]
(For use with slotted-head (minus) screw)
Tip thickness
Bit tip thickness Code No.
955658
0.8
1 955673
Code No.
303624
321813
Bit No.
No. 2
No. 3
--- 8 ---
Applicable screw dia. (mm)
4
5 --- 6
Screw size
Code No.
3 --- 5 mm
971511Z
6 --- 8 mm
971512Z