Installing or removing the rear Wi-Fi antenna
Attention:
Do not open your computer or attempt any repair before reading and understanding the "Read this first: Important
safety information" on page v.
This section provides instructions on how to install or remove the rear Wi-Fi antenna.
Installing the rear Wi-Fi antenna
To install the rear Wi-Fi antenna, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Install the rear Wi-Fi antenna to the rear Wi-Fi antenna cable connector attached on the rear of the
computer.
3. Adjust the angle of the rear antenna to lower the risk of breaking the antenna by accident.
Figure 82. Installing the rear Wi-Fi antenna
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 123.
Removing the rear Wi-Fi antenna
To remove the rear Wi-Fi antenna, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Straighten the rear Wi-Fi antenna so that it can be more easily twisted.
.
Chapter 9
Installing or replacing hardware
121