Replacing The Secondary Hard Disk Drive - Lenovo ThinkStation P300 User Manual

Hide thumbs Also See for ThinkStation P300:
Table of Contents

Advertisement

9. To install a new hard disk drive into the blue bracket, flex the bracket and align pin
and pin
4
on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
board
5
on the bottom of the hard disk drive.
Figure 60. Installing the hard disk drive into the bracket
10. Slide the new hard disk drive into the drive cage until it snaps into position.
Figure 61. Installing the primary hard disk drive
11. Connect the signal cable and the power cable to the new hard disk drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 123.

Replacing the secondary hard disk drive

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
108
ThinkStation P300 User Guide
1
, pin
2
, pin
3
,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents