4. Install the Wi-Fi adapter card into the PCI Express x1 slot on the system board. Then, rotate the PCI
card retainer to the closed position. See "Locating parts on the system board" on page 13.
Figure 107. Installing the Wi-Fi adapter card
5. If the installed Wi-Fi card module supports the Bluetooth function, use a Bluetooth cable to connect the
Bluetooth connector on the Wi-Fi adapter card to the front USB connector 1 on the system board. See
"Locating parts on the system board" on page 13.
Figure 108. Connecting the Bluetooth cable
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 109.
Installing or removing the rear Wi-Fi antenna
This section provides instructions on how to install or remove the rear Wi-Fi antenna.
102
ThinkCentre M83, M93/p User Guide