MP-202 Telephone Adapter
9.
Check the check box 'Edit the Newly Created Connection' to be routed to the new
connection's configuration screen after clicking 'Finish'.
10.
Click 'Finish' to save the settings; the new L2TP IPSec VPN connection is added to
the network connections list; it is configurable like any other connection.
9.4.3
General
This section displays the connection's general parameters.
Parameter
Schedule
Network
MTU
9.4.4
PPP Configuration
Refer to 'PPP Configuration' on page
User's Manual
Table 9-9: General Settings
By default, the connection is always active.
However, you can configure scheduler rules (via
Advanced>Scheduler Rules) in order to define
time segments during which the connection may
be active. Once a scheduler rule(s) is defined, this
field changes to a drop-down list, allowing you to
choose between the available rules.
Select whether the parameters you are
configuring relate to a WAN, LAN or DMZ
connection, by selecting the connection type from
the drop-down list.
MTU is the Maximum Transmission Unit. It
specifies the largest packet size permitted for
Internet transmission. When set to its default
(Automatic), the gateway selects the best MTU for
your Internet connection. Select 'Automatic by
DHCP' for the DHCP to determine the MTU. If you
select 'Manual', it is recommended to enter a
value in the range of 1200 to 1500.
82
99
9. WAN Settings
Description
February 2007