AudioCodes MP-202 User Manual page 106

No IP Address
Figure 10-3: Internet Protocol Settings - No IP Address
Obtain an IP Address Automatically
Figure 10-4: Internet Protocol Settings - Automatic IP
MP-202 Telephone Adapter
Select 'No IP Address' if you require that your
Telephone Adapter has no IP address. This can
be useful if you are working in an environment
where you are not connected to other networks,
such as the Internet.
Your WAN connection is configured by default to
act as a DHCP client. You should keep this
configuration in case your service provider
supports DHCP, or if you are connecting using a
dynamic IP address.
The server that assigns the Telephone Adapter
with an IP address, also assigns a subnet mask.
You can override the dynamically assigned subnet
mask by selecting the 'Override Subnet Mask' and
specifying your own mask instead.
You can press the 'Release' button to release the
current leased IP address. Once the address has
been released, the button text changes to
'Renew'. Use the 'Renew' button to renew the
leased IP address.
106
MP-202
LTRT-50604