AudioCodes MP-202 User Manual page 121

MP-202 Telephone Adapter
1. Configure Existing Bridge
Select this option and click 'Next'; the screen 'Network Bridging' opens (refer to
the figure below) allowing you to add new connections or remove existing ones,
by checking or unchecking their respective check boxes.
For example, checking the WAN check box will create a LAN-WAN bridge.
2. Add a New Bridge
Select this option and click 'Next'; a different 'Network Bridging' screen opens
(refer to the figure below) allowing you to add a bridge over the unbridged
connections, by checking their respective check boxes.
User's Manual
Figure 10-28: Network Bridging
Figure 10-29: WLAN-LAN - Network Bridging
121
10. VLAN and Bridge Settings
February 2007