Sony HT-SL70 Operating Instructions Manual page 42

Specifications (continued)
Sub woofer
• SA-WMSP70 for HT-SL70 and HT-SL65 only
• SA-WMSP50 for HT-SL60, HT-SL55 and
HT-SL50 only
• SA-WMSP40 for HT-SL40 only
Speaker system
Speaker unit
Enclosure type
Continuous RMS power output
(6 ohms, 20 – 250 Hz)
SA-WMSP70/
SA-WMSP50
SA-WMSP40
Reproduction frequency range
High frequency cut-off frequency
Input
Power requirements
Area code
CEL, CEK, SP
GB
42
Active subwoofer,
magnetically shielded
Woofer: 20 cm cone type
Acoustically Loaded Bass
Reflex
100 W
75 W
28 Hz – 200 Hz
150 Hz
LINE IN (input pin jack)
Power requirements
230 V AC, 50/60 Hz
Power consumption
SA-WMSP70/ 100 W
SA-WMSP50
SA-WMSP40 75 W
Approx. 270 × 325 ×
Dimensions (w/h/d)
398 mm including front
panel
Mass
SA-WMSP70/ Approx. 10.0 kg
SA-WMSP50
SA-WMSP40 Approx. 9.0 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U40 (1)
R6 (size-AA) batteries (2)
Speakers
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Sub woofer (1)
Speaker cords (long) (2)
Speaker cords (short) (3)
Speaker foot pads (20)
(HT-SL60, HT-SL55, HT-SL50 and HT-SL40 only)
Sub woofer foot pads (4)
Coaxial digital cord (1)
Monaural audio cord (1)
Colour label for speakers (5)
For details on the area code of the component you
are using, see page 4.
Design and specifications are subject to change
without notice.
HT-SL55 4-247-583-14(1) GB