Table of Contents
Advertisement
Processor
Description
Intel Core i3-4150 processor, 3.5 GHz
Intel Pentium G3250 processor, 3.2 GHz
Intel Celeron G1840 processor, 2.8 GHz
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the heat sink
4.
Rotate the locking lever to its full open position (1).
5.
Carefully lift the processor from the socket (2).
CAUTION:
them could cause irreparable damage. Once pins are damaged it may be necessary to replace the
system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to the
processor's solder connections.
Reverse the removal procedure to install a new processor.
NOTE:
After installing a new processor onto the system board, update the system ROM to ensure that the
latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at:
http://h18000.www1.hp.com/support/files.
40
Chapter 5 Removal and replacement procedures
(Access panel on page
(Heat sink on page
Do NOT handle the pins in the processor socket. These pins are very fragile and handling
(Preparation for disassembly on page
22).
39).
21).
Hide quick links:
Advertisement
Table of Contents
