HP 280 G1 Maintenance And Service Manual page 104

Hp 280 g1 microtower business desktop pc
Table of Contents

Advertisement

Control panel message
219-ECC Memory Module Detected ECC
Modules not supported on this Platform
301-Keyboard Error
303-Keyboard Controller Error
304-Keyboard or System Unit Error
501-Display Adapter Failure
510-Flash Screen Image Corrupted
511-CPU, CPUA, or CPUB Fan not Detected
512-Chassis, Rear Chassis, or Front Chassis Fan
not Detected
513-Front Chassis fan not detected
514-CPU or Chassis Fan not Detected
96
Chapter 8 POST error messages
Description
Recently added memory module(s) support ECC
memory error correction.
Keyboard failure.
I/O board keyboard controller.
Keyboard failure.
Graphics display controller.
Flash Screen image has errors.
CPU fan is not connected or may have
malfunctioned.
Chassis, rear chassis, or front chassis fan is not
connected or may have malfunctioned.
Front chassis fan is not connected or may have
malfunctioned.
CPU or chassis fan is not connected or may
have malfunctioned.
Recommended action
1.
If additional memory was recently added,
remove it to see if the problem remains.
2.
Check product documentation for
memory support information.
1.
Reconnect keyboard with computer
turned off.
2.
Check connector for bent or missing pins.
3.
Ensure that none of the keys are
depressed.
4.
Replace keyboard.
1.
Reconnect keyboard with computer
turned off.
2.
Replace the system board.
1.
Reconnect the keyboard with computer
turned off.
2.
Ensure that none of the keys are
depressed.
3.
Replace the keyboard.
4.
Replace the system board.
1.
Reseat the graphics card (if applicable).
2.
Clear CMOS. (See Appendix B,
security and resetting CMOS
on page
103.)
3.
Verify monitor is attached and turned on.
4.
Replace the graphics card (if possible).
Reflash the system ROM with the latest BIOS
image.
1.
Reseat CPU fan.
2.
Reseat fan cable.
3.
Replace CPU fan.
1.
Reseat chassis, rear chassis, or front
chassis fan.
2.
Reseat fan cable.
3.
Replace chassis, rear chassis, or front
chassis fan.
1.
Reseat front chassis fan.
2.
Reseat fan cable.
3.
Replace front chassis fan.
1.
Reseat CPU or chassis fan.
2.
Reseat fan cable.
3.
Replace CPU or chassis fan.
Password

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents