Top Cover - HP ENVY 17 Maintenance And Service Manual

Top cover

NOTE: The top cover spare part kit includes the TouchPad and TouchPad cable.
Description
For use only on computer models with USB 3.0 capability
For use only on computer models with USB 2.0 capability
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the subwoofer (see
6. Remove the hard drive (see
When replacing the top cover, be sure that the keyboard and keyboard bracket (see
on page 59) are removed from the defective top cover and installed on the replacement top cover.
Remove the top cover:
1. Release the ZIF connector to which the integrated volume dial cable (1) is attached, and then
disconnect the cable from the system board.
56 Chapter 4 Removal and replacement procedures
Battery on page 39).
Subwoofer on page 41).
Hard drive on page 51).
Spare part number
690000-001
665935-001
Keyboard
ENWW