Keyboard - HP ENVY 17 Maintenance And Service Manual

Reverse this procedure to install the top cover.

Keyboard

NOTE: The keyboard spare part kit includes a keyboard cable and a keyboard light cable.
For use in country or region:
Keyboard in natural silver finish:
For use in Belgium
For use in Brazil
For use in Canada
For use in Denmark, Finland,
Norway
For use in France
For use in Germany
For use in Italy
For use in Latin America
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Subwoofer (see
b. Hard drive (see
c. Top Cover (see
Remove the keyboard:
1. Turn the top cover upside down, with the front toward you.
2. Remove the five Phillips PM2.5×3.6 screws (1) that secure the keyboard bracket to the top cover.
3. Slide the keyboard bracket (2) toward the top edge of the top cover until the five tabs (3) on the
bottom edge of the bracket disengage from the top cover.
ENWW
Spare part number:
665917-A41
665917-201
665917-121
665917-DH1
665917-051
665917-041
665917-061
665917-161
Battery on page 39), and then remove the following components:
Subwoofer on page 41)
Hard drive on page 51)
Top cover on page 56)
For use in country or region:
For use in the Netherlands
For use in Portugal
For use in Russia
For use in Saudi Arabia
For use in Spain
For use in Switzerland
For use in Turkey
For use in the United Kingdom and
Singapore
For use in the United States
Component replacement procedures
Spare part number:
665917-B31
665917-131
665917-251
665917-171
665917-071
665917-BG1
665917-141
665917-031
665917-001
59