Menu #1-Basic Features; System Features Menus - Clifford Matrix 2 Installation Manual

and then press it once more and HOLD it. The siren would chirp seven times to confirm access to
the seventh feature.
To select another menu:
1. Press and HOLD the Valet/Program switch.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating
which menu has been accessed.
For instance, if you just programmed some features in Menu #1 (Basic Features) and you wish to
program a feature in Menu #2, you press and HOLD the Valet/Program button. After three
seconds, the siren chirps twice indicating access to Menu #2.
To exit the learn routine do one of the following:
➤ ➤ Close the open door.
➤ ➤
Turn the ignition on.
➤ ➤
No activity for longer than 15 seconds.
➤ ➤ Press the Valet/Program switch too many times.

System Features Menus

Items in b b o o l l d d text are the default settings that have been programmed at the factory. Features
followed by an asterisk (* * ) have additional settings that are available when programming the system
with a Directed Bitwriter (P/N 998T).
Menu #1 - Basic Features
Feature One Chirp
Number Setting
1-1 Active arming
1-2 Chirps ON
1-3 Ignition controlled door locks ON*
1-4 Active locking only
1-5 Panic with ignition on
1-6 0.8 second door lock pulses
1-7 Forced passive arming ON
1-8 Automatic Engine Disable ON
1-9 Armed When Driving (AWD)
1-10 Anti-Code Grabbing ON
www.clifford.com
Two-Chirp
Setting
Passive arming
Chirps OFF
Ignition controlled door locks OFF*
Passive locking
No panic with ignition on
3.5 second door lock pulses
Forced passive arming OFF
Automatic Engine Disable OFF
Vehicle Recovery System (VRS)
Anti-Code Grabbing OFF
15