Power Consumption Testing; Maximum Input Amps; Energy Smart Enablement - Dell PowerEdge T610 Technical Manual

Dell
Airborne contaminant level
Class G1 or lower as defined by ISA-S71.04-1985 (G1 maximum corrosive contaminant levels measured at ≤ 50%
relative humidity)
For additional information about environmental measurements for specific system configurations, see
Dell.com/environmental_datasheets.
5.6

Power Consumption Testing

Feature
Dimensions
Status Indicators
Integrated Fans
Fixed Input Plug
AC Cord Rating
Input Voltage
Auto-ranging
Line Frequency
Maximum Inrush Current
Hot-Swap Capability
Output Power
Maximum Heat Dissipation
Efficiency (20% - 100%
Load)
1
Does not include the power supply handle or ejection tab
5.7

Maximum Input Amps

Maximum input current (high-output power supply):
•
12A @ 90 VAC
•
6A @ 180 VAC
Maximum input current (Energy Smart power supply):
•
7.8A @ 90 VAC
•
3.9A @ 180 VAC
5.8

Energy Smart Enablement

The 11G family of PowerEdge servers implements aspects of the Dell Energy Smart strategy. This
strategy offers the following:
PowerEdge T610 Technical Guide
Energy Smart Power
Supply
1
L-206.4mm x W-67.5mm x H-76.5mm
1 x bi-color Light Emitting Diode
1 x 60mm
IEC-C14
15 Amps @ 120 VAC, 10 Amps @ 240 VAC
90 – 264VAC
Yes
47 – 63Hz
55 Amps per supply for 10ms or less
Yes
570 Watts
1944.9 BTU per hour
86.9 – 90.5% @ 115 VAC
88 – 92% @ 230 VAC
High Output Power Supply
870 Watts
2968.6 BTU per hour
85 – 88% @ 115 VAC
87 – 90% @ 230 VAC
23