Mode
Temperature
Selectable temperature
Outdoor temperature
CAUTION:
1. If the unit is used outside at the above conditions, certain safety and function protection
features (error codes) may cause the unit to function abnormally or stop.
2. If room relative humidity is more than 80%, condensation may form on the outer portion
of the indoor unit. Set the louvers to maximum opening and turn fan to HIGH.
3. Optimum performance will be achieved when operating in the specified temperature range.
Emergency operation can be used temporarily in case of lost remote control or low battery.
Cover
Manual control
AUTO FAN/COOL
button
OPERATING TEMPERATURE
Cooling operation
62 °F ~ 86 °F
5 °F ~ 122 °F
EMERGENCY OPERATION
2
-4-
Heating operation
32 °F ~ 86 °F
5 °F ~ 86 °F
1
Lift the front panel up until it remains
fixed with a clicking sound.
Push the button 1 time, "run" indicator
2
lights up, the unit will work in forced AUTO FAN
mode (the default setting temperature
is 76 °F).
3
Press button within 5 secs. and the unit will activate
the continuous cooling mode. Press again to turn
the unit off.
Close the panel firmly to its original
4
position.
NOTE:
To restore the remote control operation,
use the remote control directly.
Drying operation
50 °F ~ 86 °F
32 °F ~ 122 °F