Resetting The Unit - Kenwood DNX892 Instruction Manual

Problem
Incorrect Lock The selected channel is a mature or
Code parental lock channel, and locked by
the parental lock or user lock code.

Resetting the Unit

If the unit or the connected unit fails to operate properly, reset the unit.
1
Press the <Reset> button.
The unit returns to factory settings.
NOTE
• Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device
connected can damage the data stored in the USB device. For how to disconnect the USB device, see
Play Media (P.14).
• When the unit is turned on after resetting, the Initial SETUP screen appears. See
Reason Solution
Enter the correct lock code.
HOME
R-CAM
Initial setup
Return to the Top page
Troubleshooting
How to
(P.11).
125