Resetting The Unit - Kenwood DNN991HD Quick Start Manual

Ñ
SiriusXM
Error Message
Check Tuner A SiriusXM tuner is not connected
to this navigation system.
Subscription The SiriusXM subscription has been
Updated - Press renewed.
Return To
Continue
Channel Not The currently selected channel is
Available unavailable.
Ch The currently selected channel is
Unsubscribed not subscribed to.
Check Antenna No antenna is connected to the
SiriusXM tuner.
No Signal No SiriusXM radio signal is received.

Resetting the Unit

If the unit or the connected device fails to operate properly, reset the unit.
1
Press the <Reset> button.
The unit returns to factory settings.
NOTE
• Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device
connected can damage the data stored in the USB device. For how to disconnect the USB device, see
Play Media (P.18).
• When the unit is turned on after resetting, the Initial SETUP screen appears. See
Cause
Check the connection to the SiriusXM tuner.
Touch [ 6 ] to clear the error message.
Check that an antenna is connected to the
SiriusXM tuner.
Return to the Top page
Troubleshooting
Solution
—
—
—
HOME 6
How to
Initial setup (P.14).
157