Resetting The Unit - Kenwood DNN9250DAB Instruction Manual

Resetting the Unit

If the unit or the connected device fails to operate properly, reset the unit.
1
Press the <Reset> button.
The unit returns to factory settings.
NOTE
• Disconnect the USB device before pressing the <Reset> button. Pressing the <Reset> button with the USB device
connected can damage the data stored in the USB device. For how to disconnect the USB device, see
Play Media (P.20).
• When the unit is turned on after resetting, the Initial SETUP screen appears. See
Return to the Top page
Troubleshooting
6
HOME
Initial setup (P.16).
How to
151