Kenwood DNX892 Instruction Manual page 85

Return to the Top page
Bluetooth Control
Connecting the Bluetooth unit
1
Touch the device name you want to
connect.
Profile select screen appears.
NOTE
• If the icon is lighted, it means that the unit will
use that device.
2
Set each profile as follows.
TEL (HFP)
Means that the device is a cell-phone.
Audio (A2DP)
Means that the device is an audio player or
cell-phone with audio player.
APP SETUP
Selects the device in which apps are installed
and how to connect with the unit. Pressing
[CHANGE], you will jump to the step 8 in page
Application link setup
56. See
NOTE
• If a device has been paired, the Bluetooth unit
cannot be connected from the paired device.
• Touching [Remove] of [Device Remove Confirm]
removes registration information. After you touch
the key, a confirmation message appears. Follow
the message and complete the operation.
84 84
(P.56).
Registering from the
Bluetooth unit
1
Search the unit ("DNX****") from your
smartphone/cell-phone.
2
Input the PIN code in your smartphone/
cell-phone.
PIN code is set to "0000" as the default.
SSP (Secure Simple Pairing of
Bluetooth 2.1 or later)
1
Search the unit ("DNX****") from your
smartphone/cell-phone.
2
Confirm the request both on the
smartphone/cell-phone and the unit.