Maintaining; Specifications - Insignia NS-SPBTP1-W User Manual

Problem
My external audio device
(MP3 player) won't play.

Maintaining

• To prevent fire or shock hazard, disconnect your speaker from the AC
wall outlet when cleaning.
• The finish on your speaker may be cleaned with a dust cloth and cared
for as other furniture. Use caution when cleaning and wiping the plastic
parts.
• If the speaker becomes dirty or smudged with fingerprints it may be
cleaned with a soft cloth slightly dampened with a mild soap and water
solution. Never use abrasive cloths or polishes as these will damage the
finish of your speaker.

Specifications

General
Bluetooth
Power requirement
Power supply
Battery
Audio output power
USB port
Dimensions (HxWxD)
10
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker
Solution
• Make sure that your external device is on and charged.
• Make sure that your external device is not paused or muted.
• Make sure that the audio cable is fully inserted into the external device and the AUX
IN jack on your speaker.
• Make sure that there are songs in your external device.
• Make sure that your external device is working properly before you connect it to your
speaker.
Caution
3.0 + EDR, support A2DP, SBC
Built-in battery
AC 120V~60Hz (built-in 300 mAh Li-ion rechargeable battery)
Built-in 300 mAh Li-ion rechargeable battery to support music playback > 2.5 hours.
Typical 3 W
Supports 5 V at 1 A charging current (no audio playback)
3.7 × 3.7 × 1.4 in (9.5 × 9.5 × 3.5 cm)
www.insigniaproducts.com
• Never allow water or other liquids to get inside your
speaker.
• Modifying or tampering with the internal components of
your speaker can cause a malfunction and might
invalidate its warranty. If your speaker is not performing
as it should, take it to the local dealer for assistance.