Do you have a question about the NS-SBAR21F20 and is the answer not in the manual?
Questions and answers
Miguel
May 1, 2025
Can 2 subwoofers, exactly alike, be connected at the same time to the soundbar for extra bass?
1 comments:
Mr. Anderson
May 16, 2025
No, the Insignia NS-SBAR21F20 soundbar is designed to connect to a single subwoofer. There is no information indicating support for connecting two subwoofers simultaneously.
This answer is automatically generated
David Rivas
January 25, 2025
How do I order a new remote for a Insignia™ - 2.1-Channel Soundbar with Wireless Subwoofer and DTS:Virtual X - Black
ONE-YEAR LIMITED WARRANTY .........26 Introduction Congratulations on your purchase of an Insignia 2.1 Channel Soundbar System. The soundbar is designed to be used with today’s flat panel TVs. It features a variety of connections, including Bluetooth, and it can either be mounted on the wall or placed on a TV stand.
2.1 Channel Soundbar System Getting started To help you get started quickly, here are the basic steps to setting up your soundbar. For more detailed information, follow the page numbers listed below: Connecting your sound source Choose a sound source, such as a TV, DVD/Blu-ray player, or smartphone to connect to your soundbar.
Page 4
NS-SBAR21F20 Connecting the AC power Plug your soundbar into an AC power outlet. For more detail, see Connecting the AC power on page 16. Back of the soundbar Connecting and positioning your subwoofer and positioning your soundbar (Optional) To enhance the low frequency sounds from your sound source, connect the included subwoofer using Bluetooth.
2.1 Channel Soundbar System Important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Page 6
NS-SBAR21F20 No naked flame sources, such as lighted candles, should be placed on the apparatus. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. Batteries should not be exposed to excessive heat such as sunshine, fire, or the like.
2.1 Channel Soundbar System Package contents USER GUIDE 2.1 Channel Soundbar System NS-SBAR21F20 Soundbar Before using your new product, please read these instructions to prevent any damage. Subwoofer User Guide Remote Control Batteries (2-AAA) Mounting Template Mounting Screws and AC Power Cord (for subwoofer) RCA Audio Cable 3.5mm to RCA Cable adapter...
NS-SBAR21F20 Side view ITEM DESCRIPTION (Power) Press to turn on the soundbar. The status indicator turns green, button yellow, blue, or purple to indicate that the soundbar is on and what input is selected. Press again to return the soundbar to standby mode. The status indicator turns red.
2.1 Channel Soundbar System ITEM DESCRIPTION USB port You can play WAV files from a USB source and charge the USB device with the 0.5 A connection output. AC IN jack Connect the AC power cord to this jack to power the soundbar.
NS-SBAR21F20 Remote control BUTTON DESCRIPTION (Power) Press to turn on the soundbar. Press again to put the soundbar into standby mode. VOL + Press to increase the volume of the soundbar. (previous) In Bluetooth mode, press to skip to the previous track.
2.1 Channel Soundbar System BUTTON DESCRIPTION BASS Press to activate the bass frequency enhancement. The status indicator on the soundbar blinks turquoise for 10 seconds. When activated, use the VOL +/- buttons to adjust the bass volume level. NEWS Press to enter the NEWS sound mode to optimize the spoken voice.
NS-SBAR21F20 Replace the battery compartment cover. CAUTIONS: • Do not spill water or any liquid on the remote control. • Do not place the remote control on a wet surface. • Do not place the remote control in direct sunlight or near sources of excessive heat.
2.1 Channel Soundbar System Connecting your soundbar Digital Optical connection (best) Connect one end of the digital optical cable (not included) to your soundbar. Connect the other end into the Digital Optical Output port on your source device. Audio source (TV, Blu-ray player, or cable box) Digital optical cable (not included)
Page 14
NS-SBAR21F20 Audio source (TV, Blu-ray player, or cable box) 3.5mm to RCA cable adapter (included) Audio source with 3.5mm jack (smartphone, tablet, iPad) RCA cable (included) RCA cable (included) Back of the soundbar Go to Connecting the AC power on page16.
Page 15
For additional information on pairing your device, see your device’s documentation. On your Bluetooth device, select “NS-SBAR21F20” from the device list. Repeat steps 1-2 if “NS-SBAR21F20” is not displayed. If a PIN code is requested, enter “0000. ”...
Bluetooth device. other Bluetooth device, then set your device to pairing mode. Select “NS-SBAR21F20” on your Bluetooth device. Note: If a device does not automatically reconnect, you may need to reselect “NS-SBAR21F20” on your Bluetooth device. Connecting to a different device...
Note: When disconnected, your Bluetooth device list might show the subwoofer name “NS-SBAR21F20SW”, but it only allows the soundbar NS-SBAR21F20 to pair. It cannot be connected by your Bluetooth device. www.insigniaproducts.com...
Press and hold three seconds to disconnect the soundbar from the subwoofer if they are connected. This allows the subwoofer to be paired with the previous or a new soundbar (NS-SBAR21F20). Positioning the soundbar WARNING: Improper installation can result in serious injury or damage to your soundbar.
2.1 Channel Soundbar System Positioning the subwoofer For the best sound results from your subwoofer, it should be placed against a wall or in a corner of the room. The location within the room is less important, because bass tones are omni directional. Mounting your soundbar on a wall (optional) Notes: •...
NS-SBAR21F20 25.6" (650 mm) Approx. " 5/32 (4 mm) Wall Align the speaker hanging brackets with the screws, then hang the soundbar on the screws. WARNING: Improper installation can result in serious injury or damage to your soundbar. If necessary, seek the assistance of a professional.
2.1 Channel Soundbar System Adjust the volume on your soundbar or the source audio device to a comfortable level. WARNING: Continuous use of high volume sound may permanently damage your hearing. Press the (Power) button again to turn off your soundbar. The status indicator lights red.
Page 22
NS-SBAR21F20 PROBLEM POSSIBLE SOLUTIONS The sound is breaking • Make sure that you are connected to an audio OUT jack up or buzzing. on your sound source. The port will not send audio out if it is an INPUT jack.
Page 23
• Make sure that your Bluetooth device is not paired to any other device. • Make sure that you have selected “NS-SBAR21F20” on your Bluetooth device. The wireless • The wireless subwoofer is set at the factory so that the...
NS-SBAR21F20 PROBLEM POSSIBLE SOLUTIONS “NS-SBAR21F20” does • Shorten the distance between your soundbar and your not appear on my Bluetooth device. Bluetooth device. • Put your soundbar into pairing mode, then refresh your list of Bluetooth devices. For more information, see the documentation that came with your Bluetooth device.
Page 25
2.1 Channel Soundbar System This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts.
Page 27
Damage due to incorrect operation or maintenance • Connection to an incorrect voltage or power supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold “as is” or “with all faults” •...
Need help?
Do you have a question about the NS-SBAR21F20 and is the answer not in the manual?
Questions and answers
Can 2 subwoofers, exactly alike, be connected at the same time to the soundbar for extra bass?
No, the Insignia NS-SBAR21F20 soundbar is designed to connect to a single subwoofer. There is no information indicating support for connecting two subwoofers simultaneously.
This answer is automatically generated
How do I order a new remote for a Insignia™ - 2.1-Channel Soundbar with Wireless Subwoofer and DTS:Virtual X - Black