NS-SPBTP1-W Bluetooth Plug-in Wall Speaker Important safety instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Page 4
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker 16 The wall plug is the disconnecting device. The plug must remain readily operable. 17 The batteries (battery pack & batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker Features • Bluetooth connectability • Built-in power adapter • Built-in rechargeable battery Package contents • Bluetooth plug-in speaker • Quick Setup Guide Item Description (power/pair) • Press and hold for three seconds to turn this system on.
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker Setting up your Bluetooth speaker Your plug-in wall speaker is typically used while plugged into a wall socket. You can also use the speaker unplugged, with the built-in rechargeable battery. Charging the battery Your speaker has a built-in rechargeable battery, which must be charged to use the speaker.
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker Using your Bluetooth speaker Turning on and pairing your speaker 1 Press and hold the (power/pair) button for three seconds to turn on your speaker. 2 Press and hold the (power/pair) button for two seconds to enter pairing mode.
Page 8
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker Connecting two Bluetooth devices simultaneously 1 Press and hold the (power/pair) button for two seconds to disconnect the current Bluetooth connection and enter pairing mode, then follow steps 3 and 4 in “Turning on and pairing your speaker” on page 7, to establish a Bluetooth connection with another device.
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker Charging an external device You can charge an external device with a USB cable when your speaker is plugged into an AC wall outlet. • To charge your external device, plug a USB cable from the device (such as a mobile phone, tablet, or wireless headset) into the USB port on the side of your speaker.
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker Problem Solution My external audio device • Make sure that your external device is on and charged. (MP3 player) won't play. • Make sure that your external device is not paused or muted. • Make sure that the audio cable is fully inserted into the external device and the AUX IN jack on your speaker.
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 12
NS-SPBTP1-W Bluetooth Plug-in Wall Speaker www.insigniaproducts.com...
Products and parts replaced under this warranty become the property of Insignia and are not returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Insignia Product during the Warranty Period.
Page 14
FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND...