Insignia voice speaker
with google assistant
built in (12 pages)
Summary of Contents for Insignia NS-SB314
Page 1
User Guide Soundbar Home Theater Speaker System with Bluetooth NS-SB314 Before using your new product, please read these instructions to prevent any damage.
Important safety 18 Batteries should not be exposed to excessive heat such as sunshine, fire, or the like. instructions Warning Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 1 Read these instructions. 2 Keep these instructions.
• - Bluetooth device. 3 On your Bluetooth device, select “NS-SB314” from the device list. Repeat step 2 if “NS-SB314” is not enhanced. 2 After connecting power, see USING YOUR SOUNDBAR on • News - Select for clear voice reproduction.
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth Soundbar features Top view Component Description Standby indicator Lights when the soundbar is in standby mode. (Power) button and Press to turn on the soundbar, the indicator turns green. Press again to return the soundbar to standby mode.
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth Back view Component Description Hanging brackets Use to hang the soundbar on a wall. SUBWOOFER OUT jack Connect a powered subwoofer to this jack. DC IN jack Connect the AC adapter to this jack to power the soundbar.
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth Remote control Component Description (Power) button Press to turn on the soundbar. Press again to put the soundbar into standby mode. SOURCE buttons Press to select the sound source for your soundbar: •...
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth Installing or replacing the remote control Digital connections (best) battery Note 1 Open the battery cover latch on the remote If you use the OPTICAL connection, change the control. device’s audio output to “PCM” format. Refer to the manual you received with the output device for additional information.
3 On your Bluetooth device, select “NS-SB314” from the device list. Repeat step 2 if “NS-SB314” is not displayed. 4 If a PIN code is requested, enter “0000. ” www.insigniaproducts.com...
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth 5 When pairing is completed the Bluetooth Positioning the soundbar indicator on the top of your soundbar turns on. Warning Notes Improper installation can result in serious injury or • Some devices, such as an iPhone, connect damage to your soundbar.
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth Mounting your soundbar on a wall (optional) 5 Secure two screws (not included) to the wall or wall anchors (if required). The screws must You will need: protrude from the wall by about 1/4”. Use a #10 wood screw (or similar), 1 1/2"...
IR sensor on the soundbar. • Make sure that you have selected “NS-SB314” on your • The remote control battery is exhausted, replace it. Bluetooth device. • Point the remote control at the IR sensor on the soundbar.
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth Specifications Designs and specifications are subject to change without notice. Power output 39W total: left and right channel 8W (10% THD+N), built-in subwoofer 23W (1% THD+N) Frequency response 150 Hz ~ 15 kHz Subwoofer output Dimensions (approx.)
Page 14
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth www.insigniaproducts.com...
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT Insignia and are not returned to you. If service of Products or APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL parts are required after the Warranty Period expires, you must RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY pay all labor and parts charges.
Need help?
Do you have a question about the NS-SB314 and is the answer not in the manual?
Questions and answers