Keys Fitness Treadmill KF-T6.0 Owner's Manual page 6

www.keysfitness.com
MAIN FRAME
ASSEMBLY FOR uPRIGhT TuBES
Step 1:
SCREW/MISC
After unpacking the box, lift up the upright
tubes so that the screw holes are aligned.
Step 2:
Secure the upright connection with allen
bolts M8*55 (Qty 6) and flat washers
9*16*1.6 mm (Qty 6) at the upright tubes.
In the same area you will need to use allen
bolts M8*15*15 (Qty 4) and flat washers
9*16*1.6 mm (Qty 4) to secure as well.
Note: Be careful not to pinch the wire
harness.
Note: Hand tighten bolts until console
is attached and secure as indicated in
page 8. Then tighten with tool provided.
6 Assembly
1
ALLEN BOLTS M8*55
WASHER 9*16*1.6mm
WASHER 9* 16* 1.6MM
ALLEN BOLT M8*55
PHILLIPS SCREW M6*20
PHILLIPS SCREW ST4.2*16
WASHER 11* 20*2MM
PHILLIPS SCREW ST4.2*13
ALLEN BOLT M8*15*15
CONSOLE
LEFT FENDER
END CAP LEFT
END CAP RIGHT
FENDER
RIGHT FENDER
SAFETY KEY
6MM
TOOL
WASHER
9*16*1.6mm
ALLEN BOLT M8*55
ALLEN BOLTS
M8*15*15
ALLEN BOLT M8*15*15
PHILLIPS SCREW M6*30
WASHER 6.6* 12* 1.6MM