Registration Roller Assembly; Detaching The Registration Roller Assembly - Canon PC400 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
B. Registration Roller
Assembly
1. Detaching the Registration Roller
Assembly
1) Detach the
assembly.
2) Remove the two screws (M4X10;
black) , and detach the registration
roller assembly
front slightly and as if to move it to
the front.
Note:
When installing the registration
roller assembly to the copier, be
sure that the sheet shown in Figure
5-502B is between the upper and
lower registration rollers.
5-14
COPYRIGHT © 1998 CANON INC.
copyboard drive
while lifting its
CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 5-501B
Sheet Registration roller (lower)
Figure 5-502B