Canon PC400 Service Manual page 3

This Service Manual provides information needed to service the plain paper copiers
FC200/PC400(120V model), FC220/PC420(120V model), and PC430(LGL model) in
the field.
The FC200/PC400 differs from the FC220/PC420/PC430 for the following:
FC220/PC420/PC430 Not available
FC200/PC400
This Service Manual consists of the following chapters:
CHAPTER 1, "General Description," introduces the copier's features and specifica-
tions, shows how to operate the copier, and explains how copies are made.
CHAPTER 2, "Basic Operation," provides outlines of the copier's various mechanical
workings.
CHAPTER 3, "Exposure System," discusses the principles of operation used for the
copier's lens drive unit and scanner drive unit. It also explains the timing at which these
drive units are operated, and shows how they may be disassembled/assembled and
adjusted.
CHAPTER 4, "Image Formation System," discusses the principles of how images
are formed. It also explains the timing at which the various units involved in image for-
mation are operated, and shows how they may be disassembled/assembled and adjust-
ed.
CHAPTER 5, "Pick-Up/Feeding System," explains the principles used from when
copy paper is picked up to when a copy is delivered in view of the functions of electrical
and mechanical units and in relation to their timing of operation. It also shows how these
units may be disassembled/assembled and adjusted.
CHAPTER 6, "Fixing System," explains the principles used to fuse toner images to
transfer media in view of the functions of electrical and mechanical units and in relation
to their timing of operation. It also shows how these units may be disassembled/assem-
bled and adjusted.
CHAPTER 7, "Externals/Auxiliary Mechanisms," shows the copier's external parts,
and explains the principles used for the copier's various control mechanisms in view of
the functions of electrical and mechanical units and in relation to their timing of opera-
tion. It also shows how these units may be disassembled/assembled and adjusted.
CHAPTER 8, "Installation," introduces requirements for the site of installation, and
shows how the copier may be installed using step-by-step instructions.
CHAPTER 9, "Maintenance and Servicing," provides tables of periodically replaced
parts and consumables/durables and scheduled servicing charts.
CHAPTER 10, "Troubleshooting," provides tables of maintenance/inspection, stan-
dards/adjustments, and problem identification (image fault/malfunction).
Appendix contains a general timing chart and general circuit diagrams.
COPYRIGHT © 1998 CANON INC.
INTRODUCTION
Model Manual pick-up
Available
CANON PC400/420/430,FC200/220 REV.0 JAN.1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Multifeeder
Available Available
Not available Not available
AE
i