Touch Calibration - Planet Audio P9640B User Manual

INSTRUCTIONS
Version
Touch the icon [ ]in setting interface to enter the
interface below to check the software version number
of DISC/MCU/TFT/BT ( The version information is displayed
please prevail in kind.)

Touch calibration

If the touch position is biased, you may touch the icon "Calibrate" for calibration.
Touch the icon [ ] in setting interface to find the setting bar [
and then touch any icon [ ] to enter the following calibrating interface.
Touching methods
Use touch pen to click the center of "+" icon, and move along with center of "+" icon so
as to calibrate the screen. It shall automatically save data and exit after screen calibration.
Please accurately click all positions on screen, or the accuracy of touch calibration shall
be affected.
15
12.
After finished the calling, press this button to hang up the phone.
13.
When this is a calling coming in, press this button to answer the phone.
14.
Press this button can eject the disc.
15. Disk load slot
Opening for disks to enter or retreat.
] ,
INSTRUCTIONS
04