Table of Contents
Advertisement
Safety
Safety Instructions For Machinery
21 SECURE WORKPIECE.
Use clamps or a vise to hold the workpiece when
practical. A secured workpiece protects your
hands and frees both hands to operate the
machine.
22 DO NOT OVERREACH.
Maintain stability and balance at all times.
23 MANY MACHINES CAN EJECT WORK PIECE
TOWARD OPERATOR.
Know and avoid conditions that cause the
workpiece to "kickback."
Carba-Tec Pty Ltd, its authorised agents, representatives, franchisees and associated com-
panies, shall not be held liable in the event that the use of this machine, is contrary to any stan-
dard, regulation, act, or generally acknowledged (or site specific) safe work practice, nor shall
they be liable for any defect, damage, injury, death or malfunction caused to, or by the prod-
uct, due to misuse, neglect, accident, vandalism, damage in transit, normal wear and tear, al-
teration, modification or any unusual physical, environmental or electrical stress.
This manual is subject to copyright. You may download, display, print and reproduce this ma-
terial only in it original and un-altered form (retaining this notice) for your personal, non-com-
mercial use ONLY.
5
WARNING
24 ALWAYS LOCK MOBILE BASES (IF USED)
BEFORE OPERATING MACHINERY.
25 CERTAIN DUST MAY BE HAZARDOUS
Dust can be harmful to the respiratory systems of
people and animals, especially find dust. Be aware of
the type of dust you are exposed to and always wear
a respirator designed to filter that type of dust.
Limited Liability
COPYRIGHT
www.carbatec.com.au
Advertisement
Table of Contents
