How To Use Your Steam Cleaner; Using The Accessories - Reliable Enviromate T630 Instruction Manual

HOW TO USE YOUR STEAM CLEANER

1. Remove the water tank cap (6), and fill the tank (6) up to a maximum of 1.5 quarts of
water (1.5L or 6 cups). Secure the cap until snug.
2. Connect the electrical cord to the main power outlet.
3. Connect the flexible tube (10) to the appropriate accessory that you wish to use.
4. Switch on the main switch (1) by turning it to the "boiler" position (the 2
the dial) the working control light (2) will light on. When the steam control light lights
up (3), the steam cleaner is ready to use.
5. When using the steam cleaner for the first time, we recommend that you allow the
steam to come out (for 10-15 seconds) by pressing the steam key on the spray gun
(10), in order to eliminate any possible residue that may have been built up by
treatments during the production process.
6. During use, the orange steam ready warning light (3) will alternately turn on and off.
This is normal because it indicates that steam is being generated in the boiler.
7. When you are finished using the steam cleaner turn the main switch off.
8. It is safe to leave water in the pressure tank when the steam cleaner is not in use. If it
is for an extended period of time (months) then it is best to flush out the remaining
water. To do so, follow the water removal instructions as outlined in the maintenance
of the boiler section.
THIS MODEL IS PROVIDED WITH THE FOLLOWING FEATURES
Red control light (4)
A red warning light signals that the water needs to be refilled.
cleaning, see the "filling your tank" instructions.
Steam regulation (On handle)
With the steam delivery adjustment, it is possible to select the steam quantity that you wish
during your cleaning from minimum to maximum
Pressure Gauge (8)
The pressure gauge indicates the operating pressure of the steam cleaner. If the needle is
in the green section, the product is operating normally. If the needle is continuously in the
red section, reduce amount of steam being used, if this does not correct the problem the
steam cleaner may require service. Please contact the place of purchase for service.

USING THE ACCESSORIES

Connecting the accessories
Connect the handle of the spray gun (10) to the extension tubes (11), pressing the locking
button lightly until the button snaps in. All the accessories are connected the same way. If
they do not snap, tighten connection until they do.
If you wish to continue steam
nd
position on