How To Use Your Steam Cleaner - Reliable EnviroMate PRO EP1000 Instruction Manual

ACCESSORIES WITH STEAM ClEANER
8. Rectangular floor brush
9. Triangular brush with black polyester bristles
10. Window cleaner with 25 cm squeege blade
11. Black upholstery scraper
12. Funnel
13. 30 mm small brush with black polyester bristles
14. 38 mm small brush with black polyester bristles
15. Extension pipes
16. Nozzle with brass tip
17. 2,45 m flexible hose
18. Pad for triangular brush
19. Drain opener key
20. Pad for rectangular brush
21. Towel
22. 35 cm squeege blade for windows
23. Aluminum nozzle
9
8
17

HOW TO uSE yOuR STEAM ClEANER

1. Remove the water tank cap (4), and fill the tank (4) up to the maximum of 3 L
(10/11 cups). Secure the cap until snug.
2. Connect the electrical cord to the main power outlet.
3. Connect the flexible hose (17) to the appropriate accessory that you wish to use.
4. Turn the main power switch (1) at position I and the green light will turn on. At
this position the steam tank is automatically supplied with water via an electroni-
cally controlled pump and heating starts. It is quite normal to hear noises during
operation.
5. NOTE: When you call for steam for the first time (after having turned the steam
cleaner on), you might notice a fast decrease in pressure. This is normal for the first
time due to air being in the steam tank.
6. After a few minutes, the steam ready light (A) will turn on, indicating that the unit is
pressurized and ready for use.
7. You can regulate the steam strength and quantity by switching between four posi-
tion on the handle of the steam hose (17)
05
10 11
18 19
12 13
20 21
14 15
22
16
23