How To Use Your Steam Cleaner - Reliable Enviromate E5 Instruction Manual

ACCESSORIES wITH STEAM CLEANER
11. Flexible hose with steam gun, steam control key and steam regulator
12. Extension tubes
13. Large brush
14. Triangular/Upholstery brush
15. Squeegee
16. Angle adapter
17. High pressure nozzle
18. Small round brush: nylon brush, brass brush
19. Wiping cloth
20. Funnel
21. Carpet sole plate
11
17

HOw TO USE yOUR STEAM CLEANER

1. Remove the water tank cap (6), and fill the tank (6) up to a maximum of 1.5
quarts of water (1.5L or 6 cups).
2. Connect the electrical cord to the main power outlet.
3. Connect the flexible tube (12) to the appropriate accessory that you wish to use.
4. Turn the main switch (1) all the way to the right (last position). At this position
the orange ready light will come on when the unit reaches operating pressure.
5. If you hear a slight hum coming from the steam cleaner, this means that the
pump is moving water from the water tank to the boiler where the necessary
steam is generated for steam cleaning.
6. NOTE: Position #1 (steam icon in the middle) is used to exhaust steam only.
The orange steam ready light does not come on when the switch is in the #1
position.
7. During use, the orange steam ready light (3) will alternatively turn on and off.
This is normal, and indicates that steam is being generated in the boiler.
8. Before storage, you must exhaust the steam. To exhaust the steam, set the
switch at the #1 position and press the steam trigger (11) on the steam gun.
9. When you are done, turn the main switch (0) to the off position, and unplug the
unit. Your steamer is now ready for storage.
05
13
12
18
14
20
19
15
16
21