Side Burner Troubleshooting; Side Burner Maintenance - Weber GENESIS Owner's Manual

16

SIDE BURNER TROUBLESHOOTING

PROBLEM
Side Burner does not light.
Flame is low in HIGH position
Push button ignition does not
work.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact
information on our web site. Log onto www.weber.com

SIDE BURNER MAINTENANCE

WARNING: All gas controls and supply valves
should be in the OFF position.
Make sure black wire is connected between the igniter and electrode.
Make sure white wire is connected between the igniter and grounding
clip.
Spark should be a white/blue color, not yellow.
1) Igniter Wire
2) Ground wire
3) Burner
CHECK
Is gas supply off?
Is the fuel hose bent or kinked?
Does burner light with a match?
® .
Turn supply on.
Straighten hose.
If match lights burner, check igniter (see below).
Side Burner Grate
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob
(2)
(1)
CURE
(3)
(1)
(2)