Leaving The Range Of The Transmitter; Clearing The Pair Settings On The Headphones - Sennheiser RS185 Instruction Manual

Troubleshooting
LEV EL
ALC
ML C
MLC
MIN
MAX
30 | RS 185

Leaving the range of the transmitter

The range of the transmitter largely depends on environmental conditions
such as wall thickness, wall composition etc. If the headphones leave the
range of the transmitter, the audio first cuts out occasionally until it finally
cuts out completely.
If you re-enter the transmission range within 5
automatically re-established.
If you spend more than 5 minutes outside the transmission
headphones switch off automatically.

Clearing the pair settings on the headphones

1 Press the Volume +/- buttons simultaneously and hold for 2 seconds.
The HDR status LED blinks red rapidly.
2 Press the HDR power button
+/- buttons. Release all 3 buttons.
The HDR status LED lights up green or red, depending on the battery
condition, and starts blinking slowly. The pairing settings on the head-
phones are cleared.
1
minutes, the connection is
while continuously holding the Volume
2
2s
range, the