Connecting The Base Station To An Optional Electronic Hook Switch Control (Ehs) - Sennheiser SD series Setup Manual

Setting up the base station
10 | SD Series – Setup Guide
Connecting the base station to an optional electronic
hook switch control (EHS)
The necessary EHS connection cables as well as adapter cables for manu-
facturer specific standards are available as optional accessories from your
Sennheiser partner. The corresponding quick guides are supplied with
the cables or can be found on the product page on our website at
www.sennheiser.com/cco.
By way of example of a Siemens and an Alcatel adapter cable, the following
describes how to connect the base station to an electronic hook switch.
1 Connect the base station to the fixed line phone.
2 Use a pointed object (e.g. a ball pen) to set the DIP switch to the posi-
tion shown.
Siemens, Agfeo, Aastra, Auerswald, etc.
1
2
Alcatel
1
2
For an overview of the available connection and adapter cables, visit
the SD series product page on our website at
www.sennheiser.com/cco or contact your Sennheiser partner.
PC
D C
A CC
d se t
H ea
e
P h on
PC
D C
A CC
d se t
H ea
e
P h on